The development of modern agricultural technology has promoted the construction of a large number of automated multi-span greenhouses. These multi-span greenhouses not only face problems in use, but also face some problems in construction. Today I will summarize the construction process of smart multi-span greenhouses. What problems will be faced.

Civil engineering issues

Civil construction problems are mainly divided into three problems: the foundation of civil construction is too large or too small, and the level of the three problems. Regarding civil engineering issues, our industry has professional specifications. For details, please refer to "NYT 1145-2006 Greenhouse Foundation Design, Construction and Acceptance Technical Specifications".

The greenhouse foundation is divided into two parts: an independent foundation and a four-circle geosphere beam. The conventional underground size of the independent foundation is 1000*1000*height, and the height generally reaches the depth of the local frozen soil layer. The surrounding geosphere beams are generally 300*300 or 400*400 in size. It is not advisable for the greenhouse foundation to refer to civil buildings that are too large, which will greatly increase the construction cost of the greenhouse, and too small a foundation will reduce the wind resistance of the greenhouse. Guangyuan Greenhouse Yugong finishing editing.

The level of greenhouses is the key to the drainage problem of multi-span greenhouses. If the drainage slope of the gutter is not designed well, it will cause the gutter to drain in time and the water inside the gutter will be reversed, which will affect the service life of the gutter.

Greenhouse installation problem

An easy-to-use smart glass greenhouse takes 6 points for good materials and 4 points for good installations. It shows that the installation problems of our installers are very important. The common installation problems of our multi-span smart greenhouse include greenhouse waterproof and sealing problems, the correct installation of solar panels, and the installation of greenhouse drive system accessories.

The waterproofing of the greenhouse is mainly the installation of sealing tape. The water-stop tape must be pasted before the installation of the sink bracket and the girder connector. Secondly, after the overall installation of the greenhouse is completed, the structural glue is used to seal the rain groove connection twice. .

The installation of greenhouse solar panels must pay attention to the first is that there must be aluminum foil tape on both sides for sealing, and secondly, attention must be paid to the front and back of the solar panel, because the front of the solar panel has the ability to sunscreen, and the inner surface has the function of anti-fogging. After a year or two, the board cannot be used. Guangyuan Greenhouse Yugong finishing editing.

The drive system is the place where the temperature is used the most and the most prone to problems. During the installation process, the drive axis of the greenhouse must be on a straight line. The second is that the travel limit switch must be in place accurately.

Greenhouse training issues

The intelligent multi-span greenhouse is a collection of complex electrical equipment. Therefore, when the construction of our greenhouse project is completed, a special person must be handed over and trained. Only those who have received professional training can operate the intelligent greenhouse. In the actual after-sales process, it was found that the damage to the drive system was mostly caused by unprofessional operation and unintelligible maintenance.