Insulating glass is made of two or more pieces of glass, the middle of the effective interval separated, theedge of the use of effective sealing, so that the formation of dry and confined glass processing products.according to the use of different spacing, can be divided into cold side process and Warm side of the two.

Commonly used aluminum spacers because of its high thermal conductivity, known as the cold side of the process, and the use of stainless steel, composite tape and other low-conductivity materials as a spacer processing process known as the warm side of the process.

The interior of the aluminum frame filled with thehioh-perfomance molecular sieve absorbance is spaced apant by a certain width of the space. and the edaeis then bonded with a high-strength sealant. in order to ensure the performance of insulating glass, must bedouble-sealed. The first seal with butyl rubber, the customer can be installed according to the needs of theway, choose the second sealant is the use of polysulfide or silicone structural adhesive.

Thermal performance: good insulation effect, is the ideal energy-saving building materials;

Sound insulation: reduce noise interference, the general insulating glass can reduce the noise of about 30dB, if filled with inert gas can further improve the sound insulation effect. Low temperature does notcondensation and anti-fog effect;

chemical properties: According to the needs of the substrate can choose a flexible combination of differentproducts to achieve the required solar transmittance and reflectivity;

Light weight: In the same thermal insulation effect, with hollow alass instead of part of the brick or concretewall, can reduce the building load, simplify the building structure, increase the lighting area. enhance indoorcomfort